Angle Frame Connector

From Open Source Ecology

Revision as of 17:45, 5 October 2019 by Marcin (talk | contribs) (→‎Production)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

CAD

Angle Connector. - FreeCAD with McMaster 6 mm nut -File:Angleconnector.fcstd. Finished STL - File:Anglecorner.stl

Concept

Production

10 cm cut off the bottom, standing on corner - . This would not stand on moving-bed printers. Babystepping correction -0.75. It does not stand on a stationary bed printer eiether. I turned it around to print standing on 6 points.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Angle_Frame_Connector&oldid=200667"