Settings Data
Jump to navigation
Jump to search
v19.06 1
600 mm/sec acceleration on x and y, and 100 on z.
v19.06 2
3000 mm/sec acceleration on x and y, and 100 on z.
v19.06 3
- Voltage on stepper driver - E, x, y - 0.5V; z is 1.05V
- Without power, heat bed was at 120V. Fixed a short in heat element. After that, Bed plate metal with reference to metal frame is 16V. Is that inductive voltage from the AC in the bed? Voltage from bottom output terminal of SSR with reference to frame is 75V. Voltage from top output terminal is 16V.