3D Printed Terminal Block

From Open Source Ecology

Revision as of 00:09, 24 October 2019 by Marcin (talk | contribs) (→‎Single)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Single

Design rationale - wires are clamped against each other in a narrow slot using a standard 6 mm bolt. Bolt heads are energized. Selt-tapping bolt hole. Can 3D print an entire electrical panel this way.

File:Terminalblock.fcstd

Retrieved from "https://wiki.opensourceecology.org/index.php?title=3D_Printed_Terminal_Block&oldid=201814"