December 2019 Production Run

1. 30 heater cartridges - [1]
2. 30 thermistors - [2]
3. 40 plugs - [3]
4. 1000 feet of ga 26 nichrome - [4]
5. 2mm fiberglass sleeve - 30 meters - [5] + 10 m of 6mm
6. 30 SD Cards - [6]
7. 22 SSRs - [7]
8. 30 PEI - [8]
9. 30 fans 24v - [9]
10. 30 blowers 24v- [10]
11. 200 pulleys - [11]
12. 200M GT2 belt - (40 machines) [12]
13. 40 sensors - [13]
14. 205 motors - [14]
15. 10 SD cards - [15]
16. 5 GFCIs - [16]
17. 20 GFCIs - [17]
18. 24 controllers - [18]
19. 30 heatbreaks each of 1.75 and 3 - [19]
20. 30 socks - v2 - [20]
21. 30 nozzles each of 1.75 - of each 4, 6, 8, 10, 12 - [21]
22. 30 nozzles each of 3.0 - 4, 6, 8, 10 - [22]
23. 36 heater blocks, v2 volcano - [23]
24. 300' of Nichrom wire - [24]
25. 30 power supplies from - [25]
26. 144 endstops - [26]
27. 5 sheets of double sided tape - [27]

• 120 linear bearings - [28]. Think of printing these, as this is just for 10
• 300 flanged bearings - [29]
• 30 Volcano Heater Blocks - [30]
• 2 Supervolcano nozzles - 0.5 mm for 1.75 filament - [31]
• 3mm TPU - [32]