MK7 Drive Gear

From Open Source Ecology

Revision as of 00:41, 28 December 2019 by Marcin (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

https://jevonblog.wordpress.com/2015/01/27/extruder-design-the-mk7-drive-gear/ - about 11 mm diameter at the drive teeth. Or about 0.22". This makes the drive force of a 72 oz in motor about 20 lb assuming perfect gear meshing against the filament.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=MK7_Drive_Gear&oldid=206910"