DIY Grinder Disk

From Open Source Ecology
Revision as of 05:12, 11 January 2020 by Marcin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Nice work - *Ingenious mechanism for tensioning sand paper around a drum. Minute 2:52 shows how to use a slit screw to tension the belt. The belt goes in the slit, and the screw is rotated.

This can be redone in STEAM Camp 2020 as a simple prototype with 555 motor, 3D printed geardown belt (20x) and pulley, and a strip of sand paper. The tensioning bolt can be 3D printed, along with a counterbalancing bolt.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=DIY_Grinder_Disk&oldid=208611"