D3D Universal FAQ

From Open Source Ecology
Revision as of 17:57, 27 January 2020 by Marcin (talk | contribs) (Created page with "=D3D Universal FAQ= Frequently Asked Questions about the D3D Universal 3D Printer How do you make sure you have proper extrusions? (3 items) 1. Make sure filament diameter...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

D3D Universal FAQ

Frequently Asked Questions about the D3D Universal 3D Printer

How do you make sure you have proper extrusions? (3 items)

1. Make sure filament diameter is set correctly in Cura. 2. Make sure the nozzle diameter in Cura matches the physical nozzle. 3. Make sure the stepping (steps / mm) is set correctly. M92 command in startup code in Cura configuration.

What is difference between gcode and the stl file? STL is the generated geometry file for Cura. It can be generated by FreeCAD, Inkscape or other programs. gcode is the motion code for the 3D printer.

  • My nozzle is oozing, what is wrong? My printer is leaving strings over empty space, what is wrong?

Retraction or too high temperature.


  • Filament size
Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_Universal_FAQ&oldid=209657"