Ironworker Concept

From Open Source Ecology
Revision as of 04:35, 15 April 2011 by Marcin (talk | contribs) (Created page with "*120 ton for up to 1.5" holes in 1" metal *Can be based on the existing Holepuncher Prototype I design *Shear for 8-12" of 1" steel *Angle cutter for up to 6x6 angle *DIY she...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • 120 ton for up to 1.5" holes in 1" metal
  • Can be based on the existing Holepuncher Prototype I design
  • Shear for 8-12" of 1" steel
  • Angle cutter for up to 6x6 angle
  • DIY shear blade - made from hardening of mild steel, at $40 in materials
  • May involve Induction Furnace for hardening
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Ironworker_Concept&oldid=21598"