Chris Vincent Log

• Worked on jet engine thermal analysis
• Now training based industrial organization. Training is not person centril. Training content - franchise model.
• Filter Fabric Specs and SDS: https://docs.google.com/document/d/1Ii41Fkw2tn07iEVb5k197K9KirK52T-53gJeRSFXCro/edit?usp=sharing
• Straightup plastic perfectly matched work well.
• Making a 3D printed mold - to print soft plast. Fishing lure material is thermoplastic.
• Or a platinum-cured silicone for skin contact material -
• Dead-on plastic - bait plastic - https://www.youtube.com/watch?v=ESSYNRm5MjI
• Gel-10 - https://www.youtube.com/watch?v=--lmQIJ_M_A
• Plastic molding - for garden tool company
• Mass mold - https://www.youtube.com/watch?v=CwymvwTjEG0
• Larger scope - remaking an industry from scratch; chemical filter. Carbon filters that go on are expensive. Say for welding.
• Doing something that works for today - and future - and OSE use - and 3rd world access.
• Respirator - [1]
• Resp face shield - does not fog up - [2]
• Condensation - don't make filter at bottom, water will get it. Lip at bottom to retain moisture is a smart idea.
• Off-shelf plastic fittings
• Chemical mask - basic material, carbon, acidic material. Filter fabric to keep things in place. Basic - baking soda; citric acid powder.
• P100 - particulate 99.97. Pleated material. Filter rating. + Edges of mask.
• Discount Filters - Greenwood Indiana. Pleating machine. MERV 11 or 13 - depends on flow rate through it.