Product Orders
Shipping Email
Hello _______________,
Just shipped your order. Please see tracking number - __________________________.
Once you receive your order, please inventory and let me know if anything is missing. The packing list is shown at _________________________________.
Some notes:
We printed this with large nozzles - 1.2 mm - so you will see that the prints are more 'brute force' and messy than 0.4 mm prints. But we favor stronger parts over better looks. Cleaning up prints with a knife or melting imperfections off with a heat guy may be useful.
You'll find your packages in 8 units a in https://photos.google.com/photo/AF1QipPq98T-h_ZZhir5AU_yaUT6UPHiV_o_sIT8Egik :
Bed Rods Frame Stepper Motors Controller Extruder Hardware Bag of All Goods Printed Parts
Special notes: ___________________________________.
Note that ___________________________________________ https://wiki.opensourceecology.org/wiki/File:Carriage_motor_merge.stl is missing.
Also note that the nozzle that I have sent is 1.0 mm, not 1.2 mm, because we were out of stock. Would you like me to send you a 1.2 mm nozzle once it's back in stock, or are you ok with the 1 mm nozzle?
Quality Control:
All parts have been verified. The controller and all electronics are in full working order. The extruder pull strength data point is 5.5 lb for the pull on 3 mm filament.
Marcin