Open Source Tractor for Everyone

From Open Source Ecology
Revision as of 20:09, 12 October 2020 by Marcin (talk | contribs) (Created page with "*$100 engine and 3D printed electrical generator. *Use small motors on the wheels - 3D printed, 2hp each. *High geardown for wheels, 3D printed with rubber such as TPO. *Some...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • $100 engine and 3D printed electrical generator.
  • Use small motors on the wheels - 3D printed, 2hp each.
  • High geardown for wheels, 3D printed with rubber such as TPO.
  • Some steel.
  • 3D printed rubbers
  • Open source power electronics
  • Total cost - about $1k as an education and practical toy.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Open_Source_Tractor_for_Everyone&oldid=235677"