Beam Deflection Calculator
Jump to navigation
Jump to search
What is Beam Deflection
Open Source
- FreeCAD WizardShaft - https://www.freecadweb.org/wiki/PartDesign_WizardShaft. This provides moment of inertia, but not deflection.
Online Calculator
- Yes! Quick analysis for different beam shapes in different materials - https://www.engineering.com/calculators/beams.htm
Example - Refer to Beam Picture Above
1 lb force, on a 12" shaft. Force point in middle of shaft, so this would be worst case scenario
Interpretation: for reference, this is about 100 micron deflection, but if shaft were supported on one end, so actual result is better.
What would a 3" rod withstand if it were to bend 100 microns (5 thou)?
About 9000 lb!
