Basics

This Page aims to go over recipes for various pellet fuels
MAINLY:
- Wood Pellets
- Pelletized Biomass (Non-Wood)
- Pelletized RDF
- Charred or Torrefied versions of these
The attention will mainly be on Additives, Beneficial Blending, and Moisture Content recommendations
The Additives mentioned can probably be of use for Paper Logs / Briquettes and Molded Pulp

Additives

Lignin
- If not burned at the Paper Mill or Biorefinery for energy, it cam be diverted to uses such as this
- Bio-Thermoplastic which as per this paper The lignin melts fully at 147 °C and flows at 163 °C (Fisher Scientific melting point tester). The lignin was dried at 60 °C for 8 hours