Basics

This page aims to go over Foaming Hand Soap, and how it differs from conventional Liquid Hand Soap
It will then explore:
- Existing Off The Shelf Options to determine what is cheapest (without becoming crappy) and/or what option is the most Sustainable
- Existing DIY/OS Recipes
- If/How One can convert Liquid Soap into Foaming Soap Solution
  - THINKING it’s just simply a matter of Dilution, but want to check

Research Temporary Trashcan Section

The dispenser adds a bit of air which is PART OF the key to Foaming Soap
Supposedly, especially due to being diluted, the soap is at risk of microbial growth, this MAY need to be addressed
- Sadly due to diy soap making HEAVILY intersecting with the “Chemicals are Scary” / Anti-Science crowd, not too much info on this aspect in existing recipes
- A sufficient amount of alcohol/ Hand Sanitizer MAY do the trick?
Most posts are saying “3 or 4 to 1” Water to Soap Ratios, which sounds about right
The semi-disposable Dial / Store Brand Foaming Dispensers may not like Alcohol/some solvents too which could be an issue

Minimum Viable Soap
- A concept for a “base” soap that only has water, the soap agent, and MAYBE a thickener/polymer etc
  - This could be turned into Liquid Hand Soap, Foaming Hand Soap, “Mechanic’s Soap”, or any color/scent the user desires etc via blend in’s
    - Simplifies logistics SOMEWHAT, akin to the Single Fuels Concept
      - If more than simple dilution with water is needed, this holds less true
Soapmaking
- It is a hobby for some, especially hipster Bar Soaps and “Bath Bombs”, this is an area an OSEH Type Makerspace could lean into