Mount Wheels

• Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10"
• Download CAM files for wheel plates -[1]
• Configure LinuxCNC
• [4] Torch out plates (or cut by hand)
• Grind and ream
• [8] Weld 9/16"x2" bolts onto back of plate with wheel providing pattern
  • [4] Put wheel on ground
  • [4] Place plate on top of wheel
  • [8] Stick bolts in holes and align
  • [8] Weld bolt heads to wheel plate.
• Cut gussets - right angle triangles with 4" legs - 4 per wheel
• Weld collar onto wheel plate, centered and right angle
  • the gussets face to the outside of the wheel for easy access to 3/4" shaft pin.
• Weld gussets onto wheel plates.
• Bolt wheels on wheel plate with 9/16" teflon lock nuts.