Assemble H-arms

From Open Source Ecology
Revision as of 06:11, 19 June 2011 by Marcin (talk | contribs) (Created page with "*Cut 54" cross arms *[4] Cut 1/2"x4"x6" angle - 6" long *Mark position of loader shaft *Torch loader shaft, considering *Drill 3 holes on long side and 2 holes on short side **L...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Cut 54" cross arms
  • [4] Cut 1/2"x4"x6" angle - 6" long
  • Mark position of loader shaft
  • Torch loader shaft, considering
  • Drill 3 holes on long side and 2 holes on short side
    • Long side goes on cross arm, shoft side goes on main arms.
  • Measure location for mounting of cross arms.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Assemble_H-arms&oldid=31670"