Hot Rolling

From Open Source Ecology

Revision as of 22:51, 27 December 2025 by Marcin (talk | contribs) (→‎Small mill From 1/2" Rebar to 1/32" Sheet)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

About

Reversing and finishing mills - [1]
More about 2 high, 4 high, and cluster mills - [2]

Small Mills

https://www.introllingmills.com/categories/5287-rolling-mills. Chat source - for other mills - [3]

Small mill From 1/2" Rebar to 1/32" Sheet

Use 4130 steel, not CR - needs to be hard. Heat treat it - heat and qeunch in oil.
- Use an electric kiln for heat treat. Then quench oil at $20/gallon, not cheap but should last - [4]

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Hot_Rolling&oldid=317055"