Ironworker/Research Development

From Open Source Ecology
< Ironworker
Revision as of 03:22, 23 August 2011 by Ryan Lutz (talk | contribs)
Jump to navigation Jump to search


Ironworker
   Home  |  Research & Development  |  Bill of Materials  |  Manufacturing Instructions  |  User's Manual  |  User Reviews    Ironworker.png


Concepts

  • 120 ton for up to 1.5" holes in 1" metal
  • Can be based on the existing Holepuncher Prototype I design
  • Shear for 8-12" of 1" steel
  • Angle cutter for up to 6x6 angle
  • DIY shear blade - made from hardening of mild steel, at $40 in materials
  • May involve Induction Furnace for hardening