PowerCube Install Hydraulic Components

From Open Source Ecology
Revision as of 04:21, 12 December 2011 by Tom Griffing (talk | contribs) (Created page with "===Install Hydraulic Components=== * Install hydraulic suction filter in tank and hose barb in suction filter * Connect one end of suction hose to strainer hose barb, the other e...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Install Hydraulic Components

  • Install hydraulic suction filter in tank and hose barb in suction filter
  • Connect one end of suction hose to strainer hose barb, the other end to the hose barb on pump and secure with hose clamps
  • Connect adapter, nipple and male quick coupler for fluid power output port
  • Screw 3/4" male elbow into one end of oil cooler and female quick coupler to other end of elbow
  • Screw 3/4" male elbow into other end of oil cooler and JIC to 3/4" NTPF swivel adapter to 1' hose
  • Connect opposite end of hose to JIC to 3/4" NTPM adapter, then to filter head input
  • Connect . . .


Hydraulics.png
Retrieved from "https://wiki.opensourceecology.org/index.php?title=PowerCube_Install_Hydraulic_Components&oldid=47726"