PowerCube Wiring

From Open Source Ecology
Revision as of 04:25, 12 December 2011 by Tom Griffing (talk | contribs) (Created page with "===Wiring=== * The keyswitch has spade connectors for wiring and bolts to the frame for stability. These should be connected with matching crimp-on connectors. ::[[Image:keyswit...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Wiring

  • The keyswitch has spade connectors for wiring and bolts to the frame for stability. These should be connected with matching crimp-on connectors.
Keyswitch.jpg
  • Connect the remaining wires, as in the diagram below:
Wiringdiagram.png
  • Note that the thicker lines represent the heavier wires that will carry high electrical current.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=PowerCube_Wiring&oldid=47730"