CEB Press/Manufacturing Instructions/Mount Solenoid Valve Set And Controller Box

Tools

• Various Wrenches

Materials

• 3/4" Quick Coupler Set (1)
• SAE 12M to 3/4" Swivel (2)
• SAE 6M to 1/2" Swivel (6)
• Bolts and nuts for mounting on valve mount
• 3/4"x1.5" Bolts (2)
• 3/4" Nuts (2)
• Prepared Controller Box
• Prepared Controller Mount
• Prepared Valve Mount

Fabrication

Install Controller

• Bolt Controller Box to Controller Mount
• Bolt controller mount to CEB.

Prepare Solenoid

• Install the solenoid valves on the manifold in the order C-C-H, going from left to right, with the ports at the top.
• Install the quick connect inlet and outlet in the side ports on the manifold. DON'T use thread tape for any connections to the manifold.
• Onto the top of the manifold, install the 6 compression fittings into the A and B.

Install Solenoid on machine

Where to install the solenoid

• Bolt the solenoid to the valve mount.
• Bolt the solenoid and valve mount to the primary arms on the assembled CEB.
• Attach hoses from cylinders and shaker to manifold. See illustration for number locations.
  • 1=Main Cylinder Top
  • 2=Main Cylinder Bottom
  • 3=Secondary Cylinder Tee
  • 4=Secondary Cylinder Control Valve
  • 5=Shaker Non Return Line
  • 6=Shaker Return Line (Side with Needle Valve and Tee)