Torch Table Design Evolution 2.24.09

Introduction

Here is a simplified design, with spring-loaded motor meshing on rack. Spring not shown. Design follows MechMate. MechMate is much more complicated than it needs to be - and requires laser/plasma cutter for fine parts. As such, it's not the simplest, most replicable, cheapest design as called for in OSE Specifications. For purposes of the Open Source Fab Lab, it should be simplified to use as many stock steel sections, without sacrificing performance.

We have a simple design for a torch table (low torque requirement compared to Router Table), which can be upgraded to 2-sided drive for Router Table applications.

Images