Cold Saw/V1 Design Files/Blade Guard

From Open Source Ecology
< Cold Saw‎ | V1 Design Files
Revision as of 22:49, 23 May 2012 by YK (talk | contribs) (Created page with "=Blade Guard= *'''Shape: Bent Flat Bar''' *'''Thickness: 1.5mm''' *'''Width: 76.2mm''' *'''Length: 580mm''' *'''Bend 90 degrees at 120mm''' *'''Bend 90 degrees at 460mm'''...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Blade Guard

  • Shape: Bent Flat Bar
  • Thickness: 1.5mm
  • Width: 76.2mm
  • Length: 580mm


  • Bend 90 degrees at 120mm
  • Bend 90 degrees at 460mm


  • Mount Hole Spacing Along Width: 25mm, 50mm
  • Mount Hole Spacing Along Length: 20mm, 560mm
  • Mount Hole Diameter: 8mm
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Blade_Guard&oldid=63316"