Cold Saw/V1 Design Files/Interface Plate

From Open Source Ecology

< Cold Saw‎ | V1 Design Files

Revision as of 22:51, 23 May 2012 by YK (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Interface Plate

Length: 230mm

Width: 75mm

Thickness: 25mm

Drive Hole Diameter: 40mm

Drive Hole Spacing Along Length: 70mm

Drive Hole Spacing Along Width: 40mm

Motor Mount Hole Spacing Along Length: 20mm, 120mm

Motor Mount Hole Spacing Along Width: 20mm, 60mm

Motor Mount Hole: 12mm

Interfacing Hole Spacing Along Length: 180mm, 210mm

Interfacing Hole Spacing Along Width: 20mm, 60mm

Interface Hole: M12
2D Image

3D CAD STP

File:ColdSawV1InterfacePlate.stp

2D Fabrication Drawing PDF

File:ColdSawV1InterfacePlate.pdf

2D Fabrication Drawing DXF

File:ColdSawV1InterfacePlate.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Interface_Plate&oldid=63322"