Cold Saw/V1 Design Files/Interface Plate

From Open Source Ecology

< Cold Saw‎ | V1 Design Files

Revision as of 21:20, 24 May 2012 by YK (talk | contribs) (→‎Interface Plate)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Interface Plate

Length: XXmm

Width: 127mm

Thickness: 25.4mm

Drive Hole Diameter: 57.15mm

Drive Hole Spacing Along Length: 80mm

Drive Hole Spacing Along Width: 63.5mm

Motor Mount Hole Spacing Along Length: 30mm, 130mm

Motor Mount Hole Spacing Along Width: 43.5mm, 83.5mm

Motor Mount Hole Diameter: 10.5mm

Motor Mount Hole Thread: M12x1.75

Blade Guard Mount Hole Spacing Along Length: 30mm, 130mm

Blade Guard Mount Hole Spacing Along Width: 23.5mm, 103.5mm

Blade Guard Mount Hole Diameter: 10.5mm

Blade Guard Mount Hole Thread: M12x1.75

Interfacing Hole Spacing Along Length: XXmm, XXmm

Interfacing Hole Spacing Along Width: 23.5mm, 103.5m

Interfacing Hole Diameter: 10.5mm

Interfacing Hole Thread: M12x1.75

2D Image

3D CAD STP

File:ColdSawV1InterfacePlate.stp

2D Fabrication Drawing PDF

File:ColdSawV1InterfacePlate.pdf

2D Fabrication Drawing DXF

File:ColdSawV1InterfacePlate.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Interface_Plate&oldid=63532"