Cold Saw/V1 Design Files/Shaft Coupling

From Open Source Ecology

< Cold Saw‎ | V1 Design Files

Revision as of 17:43, 25 May 2012 by YK (talk | contribs) (→‎Shaft Coupling)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Shaft Coupling

Outside Diameter: 50.8mm

Bore: 32mm

Length: 75mm

Setscrew Hole Diameter: 6.8mm

Setscrew Hole Thread: M8x1.25

Setscrew Hole Spacing Along Length: 25mm

Pin Hole Diameter: 8mm

Pin Hole Spacing Along Length: 60mm

Length Enclosing Hydraulic Motor Shaft: 38.26mm

Length Enclosing Spindle: 30mm

2D Image

3D CAD STP

File:ColdSawV1ShaftCoupling.stp

2D Fabrication Drawing PDF

File:ColdSawV1ShaftCoupling.pdf

2D Fabrication Drawing DXF

File:ColdSawV1ShaftCoupling.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Shaft_Coupling&oldid=63672"