Cold Saw/V1 Design Files/Pin Collar

From Open Source Ecology

< Cold Saw‎ | V1 Design Files

Revision as of 18:05, 25 May 2012 by YK (talk | contribs) (Created page with "*'''Outside Diameter: 25.4mm''' *'''Inside Diameter: 8mm''' *Length: 15mm''' *'''Setscrew Hole Diameter: 6.8mm thru 1 side, then M8x1.25 tap. *'''Setscrew Hole Spacing Alon...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Outside Diameter: 25.4mm

Inside Diameter: 8mm

Length: 15mm

Setscrew Hole Diameter: 6.8mm thru 1 side, then M8x1.25 tap.

Setscrew Hole Spacing Along Length: 7.5mm

2D Image

3D CAD STP

File:ColdSawV1PinCollar.stp

2D Fabrication Drawing PDF

File:ColdSawV1PinCollar.pdf

2D Fabrication Drawing DXF

File:ColdSawV1PinCollar.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Pin_Collar&oldid=63689"