Cold Saw/V1 Design Files/Drive Collar

From Open Source Ecology
< Cold Saw‎ | V1 Design Files
Revision as of 18:10, 25 May 2012 by YK (talk | contribs) (Created page with "*'''Outside Diameter: *'''Inside Diameter: 32mm''' *'''Length: *'''Setscrew Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap *'''Setscrew Hole Spacing Along Length: *'''2D...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Outside Diameter:
  • Inside Diameter: 32mm
  • Length:


  • Setscrew Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap
  • Setscrew Hole Spacing Along Length:


  • 2D Image

ColdSawV1DriveCollar.jpg

  • 3D CAD STP

File:ColdSawV1DriveCollar.stp

  • 2D Fabrication Drawing PDF

File:ColdSawV1DriveCollar.pdf

  • 2D Fabrication Drawing DXF

File:ColdSawV1DriveCollar.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Drive_Collar&oldid=63694"