Cold Saw/V1 Design Files/Support Bar

Support Bar

• Length: 300mm

• Width: 127mm

• Thickness: 25.4mm

• Mount Hole Diameter: 31.8mm

• Mount Hole Spacing Along Length: 260mm

• Mount Hole Spacing Along Width: 23.5mm

• Interface Hole Diameter: 12mm

• Interface Hole Spacing Along Length: 90mm, 120mm

• Interface Hole Spacing Along Width: 23.5mm, 103.5mm

• Stopper Hole Diameter: 12mm

• Stopper Hole Spacing: 70mm along width, 215mm along length. (Such that the blade bottoms out just before touching the vise; such that the drive assembly can reliably and safely sit back without being held)

• Stopper Notes: Remember that the stopper screw will have a nut on it which determines the contact diameter of the stopper.

• 2D Image

• 3D CAD STP

File:ColdSawV1SupportBar.stp

• 2D Fabrication Drawing PDF

File:ColdSawV1SupportBar.pdf

• 2D Fabrication Drawing DXF

File:ColdSawV1SupportBar.dxf