GRBL

From Open Source Ecology
Revision as of 04:36, 11 June 2012 by YK (talk | contribs)
Jump to navigation Jump to search

What is GRBL?

"Grbl is a free, open source, high performance CNC milling controller written in optimized C that will run on a straight Arduino."

Dank GRBL Get this one by downloading the zip file and extracting its contents into a folder of your choosing

Flash GRBL onto Arduino Uno in Windows

Arduino Hex Uploader

Modify GRBL Files for enabling GRBL flashing to Arduino board on Linux

  • Navigate to the GRBL folder

Grblfolder.png

  • Open "Makefile" in gedit
  • Edit the PROGRAMMER line as:

PROGRAMMER = -c stk500v1 -P /dev/ttyACM0 -b 115200

Grblmakefileedit.png

Flashing GRBL to the Arduino in Linux

  • Open Terminal and navigate to the GRBL folder (ex. by using the "ls" and "cd" commands)

Terminalgrbl.png

  • In Terminal, type:

make clean

Grblmakeclean.png

  • In Terminal, type:

make

Grblmake.png

  • Connect the Arduino Uno to the computer via USB cable
  • In Terminal, type:

make flash

  • Disconnect the Arduino Uno
Retrieved from "https://wiki.opensourceecology.org/index.php?title=GRBL&oldid=65333"