Cold Saw/V1 Design Files/Base Block

From Open Source Ecology
< Cold Saw‎ | V1 Design Files
Revision as of 20:52, 11 June 2012 by YK (talk | contribs) (Created page with "*'''Thickness: 25.4mm''' *'''Width: 304.8mm''' *'''Length: 457.2mm''' *'''Swivel Hole Diameter: 30mm''' *'''Swivel Hole Along Length: Centered''' *'''Swivel Hole Along Widt...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Thickness: 25.4mm
  • Width: 304.8mm
  • Length: 457.2mm


  • Swivel Hole Diameter: 30mm
  • Swivel Hole Along Length: Centered
  • Swivel Hole Along Width: 100mm from Edge


  • Vise Hole Diameter: 12mm
  • Vise Hole Rectangle: 100mm x 300mm
  • Vise Hole Rectangle Positioning: Centered at Swivel Hole


  • 2D Image

File:ColdSawV1BaseBlock.jpg

  • 3D CAD STP

File:ColdSawV1BaseBlock.stp

  • 2D Fabrication Drawing PDF

File:ColdSawV1BaseBlock.pdf

  • 2D Fabrication Drawing DXF

File:ColdSawV1BaseBlock.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Base_Block&oldid=65417"