Cold Saw/V1 Design Files/Base Flat

From Open Source Ecology
< Cold Saw‎ | V1 Design Files
Revision as of 23:05, 11 June 2012 by YK (talk | contribs) (Created page with " *'''Thickness: 25.4mm''' *'''Width: 127mm''' *'''Length: 350mm''' *'''Swivel Hole Diameter: 30mm''' *'''Swivel Hole Along Length: Centered''' *'''Swivel Hole Along Width:...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


  • Thickness: 25.4mm
  • Width: 127mm
  • Length: 350mm


  • Swivel Hole Diameter: 30mm
  • Swivel Hole Along Length: Centered
  • Swivel Hole Along Width: 100mm from Edge


  • Vise Hole Diameter: 10.5mm then M12x1.75 Tap
  • Vise Hole Rectangle: 100mm x 300mm
  • Vise Hole Rectangle Positioning: Centered at Swivel Hole


  • 2D Image

ColdSawV1Baseplate.jpg

  • 3D CAD STP

File:ColdSawV1Baseplate.stp

  • 2D Fabrication Drawing PDF

File:ColdSawV1Baseplate.pdf

  • 2D Fabrication Drawing DXF

File:ColdSawV1Baseplate.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Base_Flat&oldid=65458"