Cold Saw/V1 Design Files/Base Flat

From Open Source Ecology
< Cold Saw‎ | V1 Design Files
Revision as of 00:17, 13 June 2012 by YK (talk | contribs)
Jump to navigation Jump to search
  • Thickness: 25.4mm
  • Width: 127mm
  • Length: 350mm


  • Base Hole Diameter: 12mm with 20mm DIA 13 DEEP counterbore
  • Base Hole Rectangle: 80mm x 300mm
  • Base Hole Rectangle Positioning: Centered


  • Vise Hole Diameter: 10.5mm then M12x1.75 Tap
  • Vise Hole Rectangle: 50mm x 90mm
  • Vise Hole Rectangle Positioning: Centered


  • 2D Image

ColdSawV1BaseFlat.jpg

  • 3D CAD STP

File:ColdSawV1BaseFlat.stp

  • 2D Fabrication Drawing PDF

File:ColdSawV1BaseFlat.pdf

  • 2D Fabrication Drawing DXF

File:ColdSawV1BaseFlat.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Base_Flat&oldid=65629"