PCB Mount

Introduction

A PCB Mount firmly holds a PCB. The PCB Mount itself attaches onto an electronics case.

A PCB Mount should:

• Prevent the circuit from contacting conductive material.

• Transition from the PCB's mounting interface to the PCB Mount's mounting interface.

Action Info

1/4" x 12" x 24" HDPE Natural White

Cut to size, drill pre-tap holes, then tap those holes!

Mounting Interface

The PCB likely will have mounting holes in a unique pattern for that particular PCB. The PCB Mount should be fabricated to have the same mounting hole locations as the PCB, but the holes having thread so as to be able to screw the PCB to the PCB Mount from the top.

The PCB Mount also needs to mount onto the electronics case. Tension against the inner surfaces of the electronics case is effective especially for waterproofing, modularity, and ease of assembly/disassembly.