RepRap Part Sourcing

From Open Source Ecology
Revision as of 17:39, 2 April 2009 by WikiSysop (talk | contribs)
Jump to navigation Jump to search

Introduction

Here is a process for sourcing RepRap parts.

Sources

Printed pieces and extruder

Metal hardware from hardware store

Controller and electronics - $140 kit from the US

4 z axis stepper motors - $4.5 each at [1]

Power supply

Details

  • Here is the cheap stepper Forrest found, which is suitable for my simplified z-axis design

- [2]

Retrieved from "https://wiki.opensourceecology.org/index.php?title=RepRap_Part_Sourcing&oldid=7668"