Arms DXF Files

From Open Source Ecology

Revision as of 06:21, 12 December 2012 by Marcin (talk | contribs) (Created page with "=Quality Control= For the arms to be welded correctly, there are 2 critical quality control points: *It is possible to overlap the two flats to make two different size angles. Ma...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Quality Control

For the arms to be welded correctly, there are 2 critical quality control points:

It is possible to overlap the two flats to make two different size angles. Make sure that the weldment becomes a 4"x6" angle, not a 4.5"x5.5" angle.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Arms_DXF_Files&oldid=83512"