Arms DXF Files

From Open Source Ecology

Revision as of 06:22, 12 December 2012 by Marcin (talk | contribs) (→‎Quality Control)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Master Arms Digital Index

[ edit]

Quality Control

For the arms to be welded correctly, there are 2 critical quality control points:

It is possible to overlap the two flats to make two different size angles. Make sure that the weldment becomes a 4"x6" angle, not a 4.5"x5.5" angle.
It is possible to weld 2 identical angles or 2 angles that are mirror images of one another. Make sure you make 2 mirror images, not 2 identical angles.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Arms_DXF_Files&oldid=83513"