Dairy Milker/Manufacturing Instructions

Fabrication Diagrams

Milk Bucket

Milk Bucket

• Milk Bucket Fabrication Diagram:

File:Milkbucket.skp

1. Fabricate milk bucket
2. Install gaskets
3. Install tubing, pulsator, check valve

Teat Cups

• If you bought them prefabricated, install inflations and connect to milk and vacuum tubes coming from the milk bucket.
• If you are fabricating them:

1. Remove plungers from 600 cc syringe
2. Drill vacuum hole
3. Install barb coupler and seal with silicone
4. Connect tubing

edit drawing

Pulsator

Pulsator

• Pulsator Fabrication Diagram:

File:Pulsator.skp

1. Fabricate pulsator body
2. Install gasketry
3. Assemble solenoids
4. Connect tubing

Vacuum pump

1. Install vacuum regulator (if necessary)
2. Connect tubing to milk bucket