CEB Prototype 1 Fab

Here are most of the details for fabricating CEB Prototype 1.

We start with raw metal. Drill holes in the structure pieces, 7/16" x 6 inch u-channel: Begin putting the frame together: Use 1/2", grade 8 bolts, and the frame is complete: Cut Nylon 6/6 liner to size, and use it for abrasion resistance for the compression chamber: Install the Nylon liner in the compression chamber: Add the plate for the compression chamber box, with the Nylon underneath: Put in spacers for the bottom of the frame, as the 5 inch cylinder that we used was fatter than 6 inches of the frame width: Assemble and stand the machine: