Tractor Construction Set Design Guide

From Open Source Ecology
Revision as of 23:28, 10 April 2013 by Marcin (talk | contribs) (Created page with "*Use 4"x4" square tubing, 3/16" to 1/2" wall thickness *CNC torch holes, typically 1" *Plates are 1/2" thick *Holes can serve as holes for pins or bolts *Plates are in sizes t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Use 4"x4" square tubing, 3/16" to 1/2" wall thickness
  • CNC torch holes, typically 1"
  • Plates are 1/2" thick
  • Holes can serve as holes for pins or bolts
  • Plates are in sizes that are multiples of 4"x4"
  • For heavy duty joints, 3" pins are used
  • 3" holes are reinforced with DOM Tubing for preciseness of fit
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Tractor_Construction_Set_Design_Guide&oldid=91218"