OSE Sample Cuts

Sample Cuts in DXF. 1" hole size. Need to resize to 1-1/16" on Mike Hill Plasma Table. Erase the borders if cutting from 1/2"x8" flats. Pin is 3". DOM used around pin is 3/4" wall, to made overall diameter of hole 4.5" - with about 3/16" allowance for weld-in.

File:Samplecuts.dxf

Individual Files

Flats bonding plate - 48" length, 1/2"x8" steel stock

File:Samplecutsflats.dxf

Rounded joint plate - 48" length, 1/2"x8" steel stock

File:Samplecutsrounded.dxf

4x4x1/4" tubing - 65" long

File:Samplecutstubing.dxf