File:Stock Spacer Plate 8 inches x 8 inches.skp
Jump to navigation
Jump to search
Stock_Spacer_Plate_8_inches_x_8_inches.skp (file size: 101 KB, MIME type: application/x-koan)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Stock_Spacer_Plate_8_inches_x_8_inches.skp updated part of Backhoe_Boom_in_Sketchup this file revision addresses this point: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a little too large.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 03:49, 19 May 2013 | (101 KB) | Samthetechie (talk | contribs) | Stock_Spacer_Plate_8_inches_x_8_inches.skp updated part of Backhoe_Boom_in_Sketchup this file revision addresses this point: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a littl... |
You cannot overwrite this file.
File usage
The following 2 pages use this file: