File:All Three Wheel mounts ready for DXF conversion (v3) with 6 inch hole spacings for 3 inch bearings.skp

From Open Source Ecology
Revision as of 02:40, 19 June 2013 by Lucas Warner (talk | contribs) (The bolt holes for the three-inch bearings have been changed to 6 inches apart.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

All_Three_Wheel_mounts_ready_for_DXF_conversion_(v3)_with_6_inch_hole_spacings_for_3_inch_bearings.skp ‎(file size: 768 KB, MIME type: application/x-koan)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

The bolt holes for the three-inch bearings have been changed to 6 inches apart.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current02:40, 19 June 2013 (768 KB)Lucas Warner (talk | contribs)The bolt holes for the three-inch bearings have been changed to 6 inches apart.

You cannot overwrite this file.

The following page uses this file:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=File:All_Three_Wheel_mounts_ready_for_DXF_conversion_(v3)_with_6_inch_hole_spacings_for_3_inch_bearings.skp&oldid=97449"