3 Inch Wheel Hub

From Open Source Ecology
Revision as of 03:22, 22 June 2013 by Nottern link (talk | contribs)
Jump to navigation Jump to search

Note: this will be attached to the wheel from Monica Log

edit

  • Start with this for a similar idea, but this is single-split and needs to be attached to a wheel hub.:


Design Rationale 1

  • Take a very thick keyed coupler - say start with 3" solid coupler, 1/2" keyway
  • Slit it in half
  • Weld tabs on it for the 3/4" bolt hole
  • Weld one half of the keyed coupler into the rest of the metal wheel

Ok, I'll try something following this--Nottern link (talk) 06:08, 16 June 2013 (CEST)

Samples to Build From

3inchhub.png

Version 1

Wheelhub.png

Version 2

WheelHub2.png

Retrieved from "https://wiki.opensourceecology.org/index.php?title=3_Inch_Wheel_Hub&oldid=97925"