Thermal Dynamics Cutmaster 52

From Open Source Ecology
Revision as of 21:52, 25 June 2013 by Marcin (talk | contribs)
Jump to navigation Jump to search

http://www.weldingsuppliesfromioc.com/thermal-dynamics-cutmaster-52-plasma-cutter-1-5130-1

Cutmasterspeed.jpg

  • Operating Manual - [1]
  • Service Manual - [2]

Troubleshooting

Short Torch Parts Life:

  1. Oil or moisture in air source.
  2. Exceeding system capability

(material too thick).

  1. Excessive pilot arc time
  2. Gas pressure too low.
  3. Improperly assembled torch.
  4. Non - Genuine Thermal Dynamics

parts used

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Thermal_Dynamics_Cutmaster_52&oldid=98588"