Extruder Troubleshooting

From Open Source Ecology
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

IF extruder is not feeding and it clicks:

  1. Get up to temperature and push filament through
  2. Examine if filament just oozes out - easy and uniform, thick as normal, rushes right down
  3. If that work then go to the extrude through Cura
  4. Get it up to temperature
  5. Do an extrusion through Cura
  6. If it works, then try extrusion through the LCD screen - do it under 1 mm move menu
  7. It takes about 30 minutes to clog up
  8. Check retraction settings - use 20/1 according to [1]
  9. Look into how print speed % changes retraction settings - does it change retraction again?
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Extruder_Troubleshooting&oldid=180840"