How to Print With Acetal
(Redirected from 3D Printing with POM)
Hacked
https://www.thingiverse.com/groups/engineering/forums/general/topic:11262
Summary: bed 160C, near melt point. Nozzle 230C.
OSE Case
OSE's PEI surface is rated for 168C - [1]. So this is a perfect test case of the OSE D3D Pro insulated heated bed. Because the bed is insulated, the temperature variation should also be lower. (data to be obtained)
More about printing
- Using lame equipment - [2]
Sourcing
- See POM
