Basic Economic Analysis of Printing with Large Nozzles

From Open Source Ecology
Jump to navigation Jump to search

1.2 Nozzle, 0.4 Layer Height

45 minutes per printed piece for Universal Axis Carriage:

30 grams per piece - means we can print 33 of these on one spool.

Basic12econ.png

For $16/spool PLA filament, material is $16 for 33 of the pieces, or 50 cents per piece.

Total print would be 25 hours.

Per hour of print time, charging $1-2 would be an efficient cost to produce one part per hour. This is much better than anyone else out there. ($10/part quoted elsewhere).

$2/printer hour would be a solid business. Even at $1/printer hour could be a super lean business.

This is assuming large nozzles, so these economics would not work for 0.4 nozzles, and the $10 per piece begins to make sense.