D3D Pro 3 v2b Data Collection

• Bed lift capacity: 1.5 kg only + 0.5 kg battery - 2 kg total, on z feedrate 30.
• Reduce feedrate to 15 - #define DEFAULT_MAX_FEEDRATE { 300, 300, 15, 25 }
  • Did not change anything, so I set it back to #define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 }
• How about #define HOMING_FEEDRATE_Z (12*60)
  • Lowered multiplier from 12 to 6
  • Shows visible improvement from 2 kg to 4 kg. Leaving the multiplier at 6.