Debounce

• Example from Arduino - [1] - Too complicated for CEB case.
• In OSE's CEB press - is a debounce of the high pressure sensor really necessary?
• It appears that whenever high pressure triggers - there is a delay in the system because other steps are happening, which take time. Thus, as soon as any trigger happens - it doesn't matter if it's pressed once or multiple times during a short period - therefore - debounce should not be necessary. All we need to know is that a trigger event happened. Whenever a trigger event happens that would only be during the full expansion/retraction - and at brick pressing step. Anything else would be mechanical stuckage, and should be addressed not by debounce but by a mechanical fix.
• At the same time - including debounce would not do anything negative to the system